How to Install a Pedestal Sink
Pedestal sinks are able to make any bathroom look a bit elegant while creating more space. This is because they are more stylish than the typical countertop sink. However, since this type of sink comes in two parts, the basin and the pedestal, it can be somewhat tricky to install. Plus, the basin’s weight isn’t completely carried by the pedestal so it needs to be secured on the wall.
- Locate the place in your bathroom where you want to install the sink. Make sure that something sturdy is available for you to attach the basin to. If only plaster or drywall are there, you will need to install blocking between the wall and the studs to provide the additional support that you need.
- Put your basin and pedestal into the position where you want them to be located. Use a carpenter’s level to ensure that the basin is indeed level. Mark the position where the pilot holes are going to go – both on the wall and on the floor.
- Now that you have the holes marked, you will want to drill these holes into your wall and floor.
- Install your faucet and drain within the basin. Attach them to your water supply.
- Put your basin and pedestal into the position that you have selected. Bolt the basin securely to the wall.
- Use 2x4s to support the basin as you remove the pedestal. This will allow you to finish connecting your water supply lines. Make sure to test to see if there are any leaks. If so, you will need to use Teflon tape to fix them.
- Move your pedestal back into position. Bolt it to your floor. You may wish to also use some adhesive caulk here as well. Add caulking to the area that is between your sink and wall. Make sure to smooth out any beading that may possibly occur.