Previous Article

How to Install a Self-Waterer for Livestock

Next Article

How to Install a Serpentine Belt

How to Install a Septic Tank

Installing a septic tank is one of the more complicated Do-It-Yourself jobs. You will need a backhoe and a crane, as well as some construction experience. If you are not knowledgeable in these areas, ask a friend who is experienced if they could give you a hand with the installation. Also, be sure to have the proper permits, tools and supplies before you begin.

Depending on where you live you may need certain permits, including:



  • Septic tank permit

  • Water rights permit

  • Building permit

  • Occupation permit

  • Utility permit



Tools and Equipment:



  • Backhoe

  • Crane

  • Shovels

  • Laser level

  • Other tools may also be necessary, including plumbing tools and tape measures



Protective clothing:



  • Work gloves

  • Coverall

  • Goggles

  • High work boots or hip boots


 





  1. Be sure you check with your state, county, city and any other group such as community council or subdivision group, that may require you to obtain permits before installing a septic tank. They will need to know the size of the tank and the drainage field you plan to use to make sure that your property meets the necessary requirements. You will also need to consider limiting soil features, the possible need for expansion or replacement, and maintenance access when putting a new septic tank in.

  2. Create a scale drawing of the layout for your system to see if your lot is big enough. Most of the time, at least three-fourths of an acre is needed to install a septic tank. 

  3. Determine the height of either the seasonal high water table or the limiting soil layer to determine if you have the necessary depth yo install a septic tank. At the very least, you need at least four-inches between the tank and the limiting soil layer.

  4. When planning the layout of your septic tank and drain field, keep in mind that a maintenance vehicle will need to be able to access it periodically and these vehicles are very heavy. You do not want to place the septic tank or any pipes where the vehicles will be driving.

  5. Once you have completed your scaled layout, you will need to submit it to the proper authorities so that they can go over the design, let you know of any changes that need to be made, and issue you the required permits.

  6. After obtaining the proper permits, contact your local utility companies to let them know that you plan to dig. They will have someone come out to mark their locations so that you can avoid digging in those areas.

  7. Mark the lines of your planned excavation using ground chalk or white paint.

  8. The installation process involves three steps: placing the pipes from the house to the tank, installing the tank and running pipes to the drain field. Be sure when you are excavating that you install a proper drop so everything flows downhill. Also make sure that from the tank to the drain field also flows downhill.

  9. Have a contractor install the actual septic tank. They are very heavy, and if not handled correctly, can cause serious injury and even death.

  10. Once the tank, drain field and all necessary pipes are installed, check to see that everything is connected properly and that there are no leaks.  Mark the locations of the tank vent and drain covers, and then recover the system.