How to Install a Wireless Cycle Computer

You can install a wireless cycle computer on your bike to show you the distance you ride, how long you have been riding, and informs you on how fast you are riding. It is usually easier to install a wireless cycle computer than it is a wired one. It will only take a few minutes to learn how to install a wireless cycle computer.

1. Follow the directions that come with the wireless cycle computer to attach it to the handlebars of the cycle. Each model is different on how you attach this. Some models you will need to screw to the handlebars, while others will have zip ties that you can use to attach it. Once the mount is installed, put in the battery and then simply put the computer in it.


2. Install the speed magnet of the cycle computer. You can attach this to the spokes on the front wheel; however, if you plan on using a wind trainer, you should attach it to the back wheel spokes of the bike.


3. Install the battery to the speed sensor. In most cases, this is attached using zip ties.  Ensure that it is attached to the fork and flush to the magnet. Roll the wheel of the bike back and forth so you can get a reading on the computer. Keep doing this until you get a zero speed showing on the display.


4. Put the battery in the cadence sensor, if your cycle computer has one. You will need to use zip ties to attach it to the left side of the cycle on the chain stay. Put the cadence magnet on the left crank to ensure that the magnet is facing the censor. Adjust the sensor and magnet until you get a correct reading on the computer.