Previous Article

How to Attach Ribbons to a Navy Uniform

Next Article

How to Roll the Sleeves on a New Navy Uniform

How to Iron Navy Uniform Pants

Men and women enlisted in the Navy are highly respected and are expected to wear their uniform with great pride. They are put on a pedestal and is expected to look their best whenever they are in uniform, which includes making sure their pants are properly ironed.

Some servicemen send their uniforms to a professional dry cleaning service to have their pants cleaned and pressed, but there are others that take on the task themselves.



  1. Set up your ironing board and adjust it to the desired height.

  2. Place the iron on the board in an upright position and plug it into an electrical outlet.

  3. Turn on the iron and set it on the medium setting. It should not be set any higher because you might scorch them.

  4. Turn the pants inside out and slide the waistband over the pointed end of the ironing board.

  5. Use your hands to spread out and flatten the pants as much as possible.

  6. Fill a spray bottle with water and spray a light coat of water on the pants.

  7. Use the hot iron to remove the wrinkles from the pants. Start at the waistband and work your way down to the pelvic area. Spray some more water on the pants as you move to the other areas.

  8. Use your hands to flatten the pockets, and then iron both sides before moving on to the fly and the seams of the pants.

  9. Place one of the lets of the pants lengthwise on the ironing board and use your hands to smooth it out. Spray it with some water and slowly move the iron up and down on the fabric. Repeat the same process on the other leg.

  10. Turn the pants back on the right side and iron the top and front sections.

  11. Position the pants on the ironing board so the creases are straight and move the iron up and down on the crease.

  12. Iron the cuff of the pants to make them stiff.

  13. Take the pants off the board and place them on a hanger.