Previous Article

What is Roofing Membrane?

Next Article

How to Lay Floor Tiles on a Wooden Floor

How to Lay Floor Tiles in a Brick Pattern

Putting tile in a pattern instead of a plain grid can create a unique look. The tiles are designed to look like building blocks in the structure of a home. Floor tiles laid in a brick pattern also makes the room look wider.

Supplies:



  • Floor tiles

  • Tile adhesive

  • T-shaped spacers

  • Tape measure



  1. Set and align the first row of tiles against the battens as usual to make sure the tiles are aligned evenly. If they aren’t, you won’t be able to properly finish the project.

  2. Take measurements halfway along the first tile and create a pencil mark for reference. Put the first tile on the next row at that mark so it shows a staggered look.

  3. Keep applying rows of tiles, and measure the starting point for all the rows prior to applying the tile.

  4. Use T-shaped spacers to fit into the tile joints while placing the tiles.

  5. Remove the battens and cut the tiles to fill up any remaining areas once the adhesive under the main body is set. It is very important that the adhesive it set, because the main body will be unstable if not done properly.

  6. Finish up the project by putting grout on all the joints and caulk to all the seams when the tiles have been applied. At this point, you have finished laying floor tiles in a brick pattern. In the process, you have saved a lot of money because professional service can be very expensive.