Previous Article

How to Irrigate Foley Catheters

Next Article

How to Make Crutches Comfortable

How to Load Autoclaves

Sterilizing equipment and liquids is what an autoclave does best. This machine is regularly used in medicine, veterinary science, tattoo parlors, microbiology, dentistry, prosthetics fabrication and for decontaminating biologically hazardous waste. Highly pressurized vapor-rich heat must completely circulate around and under the items, while porous items and liquids must be penetrated by the heat in order to sanitize them. Properly loading the autoclave is crucial for correct equipment operation.


  • Check to make sure that all items to be sterilized are suitable for the autoclave to handle. Place each item into the appropriate orange or clear bags, or set them in the autoclave containers. The bagged items should be placed in a secondary metal autoclave container. The bags should have water inside of them and an opening where steam can vent out of the bags.

  • Stack the autoclave carefully. Do not overfill the autoclave. Steam must be able to penetrate throughout the machine in order to correctly sanitize the items inside. Make sure that bags are not packed too tightly. No equipment, liquids or bags should touch the top or sides of the autoclave itself.

  • Check the manufacturer's instructions for filling the autoclave with water. The pan will be in the bottom of the autoclave. Do not operate the autoclave if the pan has not been filled with the correct amount of water.

  • Place all items inside of the autoclave in containers. Nothing should be sitting on the bottom of the machine or touching the bottom of it. This applies to all objects, including instruments and glass containers.

  • Use tape, designed for use in the autoclave, on the glass jars that contain liquids. The tape should loosely go over the top and down the sides of the jars.

  • Follow the manufacturer's instructions for running the autoclave. Adhere to safety procedures to avoid injury. The autoclave should be tested for decontamination efficiency at least once a month.