Previous Article

How to Clean Suede Half Chaps

Next Article

Types of D Ring Snaffle Horse Bits

How to Make Half Chaps


Half chaps are protective gear worn by horseback riders to protect their lower extremities from bushes and branches that they come into contact with while riding. The half chaps are made of durable leather and give a rider great protection.



  1. Take measurements of your lower extremities. Measure down along the front of your thigh all the way to the bottom of your ankle. Jot down this measurement. Cut broadcloth that is equal to the measurement that you took.

  2. Fold the broadcloth in half. Take the piece of broadcloth that you cut and fold it in half longways. Make sure that the edges of the cloth line up with each other. Create a crease with the broadcloth. Take an iron to the folded fabric, and create a crisp crease along the folded edge. Unfold the fabric and open it back up.


  3. Cut the broadcloth again. Once you have the crease established, cut the fabric in half by following along with the crease you made.



  4. Secure the broadcloth to your leg. Using pins, secure the broadcloth pieces around your lower leg so that the seam travels along the front of your shin bone. Be careful not to stick yourself with the pins while you do this. Check the fabric to make sure that it fits close.



  5. Mark your seam lines. Continue using pins to mark the seam lines of the broadcloth. Use a permanent marker to label the inside and outside of the fabric. Take the pins off and remove the broadcloth.



  6. Sew the pieces together. Sew the inner and outer pieces of broadcloth together and iron them again once you are finished.