Previous Article

How to Make a Computer Support Big Hard Drives

Next Article

How to Start a Computer Support Business

How to Make a Computer Support Surround Sound

Surround sound can be experienced on the computer by installing surround speakers and a sound card. The PCI cards are installed internally or externally depending on the type of computer. Cards that support surround sound are available in most computer retail stores.


 


  • Purchase a set of surround speakers and all of cables and wire necessary to connect them.

  • Check the sound card and confirm that it is compatible with your PC. The card needs to support the number of channels that you require to work with the speakers installed.

  • Turn off and unplug the PC.

  • Locate the position of the sound card located on the back of the PC tower.

  • Remove the screws on the side panels to open the computer case and then remove the casing.

  • Follow the instructions that appear on the sound card for installation.

  • Pull the sound card carefully without forcing it. It should pop out easily. Remove the clasps holding the card in place.

  • Insert the new surround sound card in the position where the old card was located. Make sure it fits snugly and screw it on if you need to. The card should fit firmly with the ports on the adapter facing outwards.

  • Connect the surround sound speakers. You can follow color codes to install them correctly. The instructions on the speaker’s manual should guide you. The speakers should plug into the port on the PC with ease.

  • Position the speakers around the room correctly to achieve maximum quality of sound. This is vital for the complete surround experience.

  • Plug the computer back in and turn it on so that you can install the sound card’s drivers and software.

  • Restart the computer and make sure each speaker is in the correct position for five speaker surround sound.