Previous Article

How Does a Fish Hatchery Work?

Next Article

How to Start a Fish Hatchery

How to Make a Fish Hatchery Tank

A fish hatchery tank will give you a safe place to put fish that need to hatch and develop. If you keep them in the same tank as other fish you may risk them being harmed by other fish. A hatchery is necessary, especially if you want to breed them.


 

A fish hatchery tank is definitely necessary whenever you have any fish that are not fully matured yet in the same tank with fully grown fish. Because the smaller fish are not safe until they can fend for themselves you will need to keep them protected in a hatchery tank.


What You’ll Need:



  • Hand saw

  • Tape measure

  • Hot glue gun

  • Hammer

  • 1”x 1” trim board

  • 4 short and long pieces of track stripping

  • Window screen



  1. Measure the dimensions of your current aquarium. You will need to take the measurements of the height and width of the tank from the inside.

  2. Take your handsaw to cut the trim board into four different pieces. The first and second piece needs to be cut as long as the inside width. For the last two you will need to cut it to the height of the aquarium and then subtract two inches.

  3. Lay the boards in the pattern that you will be using them. Put the short track strip up over the boards where they meet together and tap them into place. Unroll your window screen and stretch it over your trim boards. Cut the screen so that it sufficiently covers the area.

  4. Use the long track strips to keep the screen into place. You can then move on to putting the divider into the tank. Ensure that it divides them evenly. Use about 25% of the tank for the smaller, infant fish. The rest can be used for the bigger, full grown fish.