How to Make a Mini Horse Harness
Mini horses or ponies are very small but their strength is remarkable and can be used to carry out several duties like pulling carts and so on. Despite the fact that they are small, they have been taught how to move but they cannot be ridden. It is important that you have the right harness and follow the correct procedure to ensure that your pony is comfortable.
- Identify the proper harness. There are harnesses designed for ponies and they are mainly made from leather or nylon
- Put a halter on the pony and tie it on a post or a convenient area where you intend to harness your mini horse.
- Inspect the horse to ensure that there are no injuries on the head or any dirt that would cause the mini horse experience excess pressure while it is working. This can be done by grooming the horse using a curry brush then to be followed with a soft brush.
- Put the collar upside down as you put it on the horse's head. This will ensure that the eyes are not bumped while the collar is passed over the head, because the upside down side is wider.
- Place the harness on the collar, buckle the straps then turn the collar towards the direction of the horse’s mane.
- Tighten the straps of the harness then buckle up the false martingale on the horse and the collar. Buckle the traces by twisting them over the buckle so as to avoid them from being dragged on the ground while the horse is being driven.
- Put on the crupper, pad and back strap, then using a thread, sew the girth through the false martingale then buckle it.
- Thread the reins into the turrets and pads of the collar. Remove the halter from the horse’s head then put on the bridle, and then reins can be safely attached to the horse’s bits.
- Hold the horse in place and slip the cart’s shafts to the tags. Unloop the traces then put them in the band on the belly and hook them on each side. Fasten the belly band and breeching straps ensuring that the tugs and shafts are ok before driving the horse off.