How to Make a Mosaic Lighthouse Garden Stone
To dress up garden stones, consider mosaics. You can create images on inexpensive plain garden stones that not only show off your creative side, but can include a theme, such as lighthouses. This is a project that can easily be completed in an afternoon.
Supplies
- Paving Stone
- Mosaic tiles/glass
- Mortar (choose a type especially for mosaics)
- Mosaic grout
- Sponge
- Sealant
- Scrubber
- Paper that is somewhat see-thru
- Marking pen
Directions
- Clean your paving stone with the scrub brush. Remove loose cement and dirt. Clean all mosaic tiles and glass. If you plan to add any other decorative elements clean those as well. Remember any dirt left behind will become a permanent part of your mosaic piece. Allow all pieces to dry completely before starting the mosaic.
- Draw your lighthouse design on the paper with the marking pen. Determine which colors will be used for each section and sort pieces accordingly. All pieces should fit into the drawing; this will be your guide.
- Mix your mortar and work small areas at a time. It is best to work from the center outward. Continue to add small sections of mortar and continue the design. As you pull pieces from the guide you created you can easily see where they fit on the paver. Once complete, allow to sit and begin to dry. You will need to wait between 60 and 90 minutes.
- Mix grout and apply between tiles. Cover all sharp edges. Grout will need to sit for up to 20 minutes. Once it begins to set, use a damp sponge to wipe away leftover grout and clean the tops of the tiles.
- Apply a sealant to protect the paver from weather and to preserve your work.