Previous Article

How to Clean a Glass Fish Tank

Next Article

How to Repair Scratches on a Glass Fish Tank

How to Make a Stained Glass Fish

Stained glass can be a very complicated task to learn at first, but with the right tools you can make a simple fish.  This is a great first or novice project because it is a popular pattern for sale at many stained glass shops and in books.  Look for glass of different colors and shades, and mix opaque with clear glass for striking effects.


 

Tools and Materials:



  • Stained Glass Sheets

  • Glass Cutter

  • Metal Came

  • Soldering Iron

  • Lead-free Solder

  • Paper

  • Scissors

  • Wax Pen

  • Flux and brush

  • Copper Foil



  • Purchase or draw up a stained glass pattern of the fish that to use as a guide. 

  • Lay out the pattern and trace the shapes onto a piece of heavy duty manila card stock. Cut the shapes of the manila card stock.

  • Choose the color and texture of stained glass sheets to buy or obtain for the project. 

  • Cut the glass with the glass cutter.  You have to bear down on the glass and maintain constant pressure as you score the glass in order to completely cut the top most layer of the glass.

  • Tap the glass gently, but rapidly with the ball end of the glass cutter tool.  This allows the glass to begin to separate at the scored line that you cut into the glass.  If this is not done rapidly, the glass will have to be scored again.

  • Pull, while tapping the glass apart.  The glass will snap into the two parts if scored well.

  • Cut the metal came into the size pieces indicated on the pattern.  Be sure the came pieces line up to one another so that none of the metal is overlapping.   Came is shaped like an H so that the glass can be held together side by side.  It is easier to work with than copper foil.

  • Use copper foil for the perimeter of the project, but consider using came for you first project.

  • Push all of the pieces of glass into the came, and assemble the fish.  Heat up the soldering iron and touch the iron to the solder. 

  • Apply flux with a small brush to the came that you intend to solder to help the solder stick to the came.

  • Touch the hot solder to the point where the came meets.  Continue to add droplets of solder on the came to fasten the ends together.  Continue until all of the metal came is fastened all the way around the fish.