Previous Article

How to Make Sure You Buy the Correct Size Bra

Next Article

Benefits of Community Gardens

How to Measure Yourself for a Bra

It is estimated that 85 to 90% of adult women in the world wear the wrong size bra. With the sizing errors being this common, t's no wonder that so many women complain of having an ill-fitting and uncomfortable undergarment. One of the best ways for your bra to fit better is to properly measure your bust.

1. Wrap a flexible measuring tape around your bust to measure the top of your band. The tape should be snug but not too tight. It needs to be wrapped around the middle of your chest, just above your breasts. It sometimes helps to wear a supportive bra while doing this measurement. Measure just above the cups if you decide to wear a bra. If you find an odd numbered measurement, round to the nearest even number.


2. Measure the bottom of the band by sliding the measuring tape down just below the breasts. Read the tape, and round up to the next even number if necessary.


3. Compare the two numbers you received from the band measurements. These two measurements should be very close to the same. You can use the average of the measurements or choose to go with the second measurement, which is the one you found when measuring below the bust.


4. Place the measuring tape around the fullest location of your breasts to find your cup size. The tape should be loosely fitted so it will be accurate. 


5. Subtract the band measurement, which you find in the first three steps, from the cup measurement. The difference determines your cup size. Refer to an online bra size conversion chart, such as the one found on the Bare Necessities website, to decide which cup size is correct for the measurements you received. In most cases, a difference of 1 inch denotes an A cup. If the difference is 2 inches, you should buy a B cup. A difference of 3 inches calls for a C cup and a 4-inch difference signifies a D cup.