How to Measure the Width of Patio Door Blinds
Vertical blinds can be a great way to control how much light enters though glass patio doors. These blinds are inexpensive and relatively easy to install. It is important, however, to correctly size blinds before you purchase and install them. In order to choose the correct size for your door, you need to take accurate measurements of the area.
Materials
- Metal tape measure
- Paper and pencil
Procedure
- Decide whether you want blinds mounted outside the trim around the door or inside it. For blinds mounted outside, you will measure the opening including the trim. For interior mount blinds, measure inside the trim.
- Use the tape measure to measure the opening at the top of the door, and record your result.
- Take a second measurement at the level of the middle of the door and a third at the bottom. Record these results.
- Examine your results, and measure again if you do not have confidence in your numbers.
- Choose the smallest of the three measurements, and round it to the nearest eighth of an inch. This is the correct measurement for the width of interior mount blinds. For exterior mount blinds, see the next step.
- Add three to four inches onto each side of your width measurement from step 5 for exterior mount blinds. This will give you blinds that block more light.
Tips
- Take additional measurements if you have any doubts. Sometimes it is helpful to take measurements on two separate days and compare the results. If the numbers do not closely match, take the measurements a third time. A little time spent on obtaining accurate measurements can prevent the headache of trying to install ill-fitting blinds.
- Make sure you use a sturdy metal tape measure with no kinks. A fabric tape measure or a damaged metal tape will not give you the same consistent results as a good metal rule.