Previous Article

How to Make Concrete Blocks Smooth

Next Article

How to Set Concrete Blocks

How to Mold Concrete Blocks

Concrete blocks are commonly used in landscaping to build outdoor walls and other landscaping design elements. These blocks are much cheaper to make than they are to purchase at the retail price. Concrete block and easily be made at home in order to help save money on an outdoor landscaping project.

Supply List



  • Numerous two-by-four pieces of wood

  • 1-inch nails

  • Concrete

  • Sand

  • Water

  • Hammer



  1. Construct the mold for a concrete brick out of basic two-by-four pieces of wood. You can easily attach the two-by-fours together using 1-inch nails to secure the mold in place. Make numerous molds so that you can make numerous bricks at the same time. The bricks will need to remain in the mold for 24 hours so it is best to make at least 10 at a time for large projects.

  2. Mix the concrete in a large container using one part of concrete to two parts sand to create a mixture that is solid enough to create a concrete brick. The amount that you will need to mix will depend on the amount of bricks that you are going to be making at one time. 

  3. Scoop the cement mixture into the molds that you have made. Make sure that you fill each mold to the top so that all of the bricks that are made are uniform in size and shape.

  4. Use the edge of a two-by-four to smooth off the top surface of each brick to create a flat and even surface.

  5. Allow the concrete to remain in the mold for a period of 24 hours before they are cured and ready to be removed.

  6. Remove the nails out of the molds using the back side of a hammer to release the completed bricks.

  7. Reattach the molds together with new nails, and repeat the process as many times as needed until you have created enough bricks for the project you are working on.