How to Mount Saddle Racks in Horse Trailers
It is important that saddles be mounted properly in horse trailers. Failure to use a saddle rack means the saddles could get banged around and damaged, or could even fall and injure the horse. The placement of the rack is also important. If the trailer doesn’t already have a specialized saddle compartment, a rack can be added to the front or unused compartment.
You need
- Gloves
- Safety goggles
- Saddle rack
- Pencil
- Tape Measure
- Cordless drill
- Drill bit
- Assistant
- Three-inch bolts and nuts
- Bolt cutters
- Adjustable wrench (spanner)
- Carpenter’s level
- File
- Silicone sealant
- Determine the best position for the rack. The horse should not be able to get to it and the straps should not be trailing on the ground. Make sure you can easily lift the saddle onto the rack when you decide where to hang it, and that it is protected from the weather elements..
- Hold the saddle rack against the wall of the horse trailer and mark the position of the mounting holes with a pencil.
- Remember to wear safety equipment and drill out the holes for the saddle rack. Use a carpenter’s level to ensure the holes are straight and even. Have someone help hold the rack in place while the nuts and bolts are being secured.
- Tighten with an adjustable wrench, sometimes called a spanner. Snip off the end of the bolt with bolt cutters and file any remaining sharp edges.
- Spread sealant around the bolts, both inside and out of the horse trailer. Let dry for at least 24 hours before attempting to use the saddle rack.