How to Paint Parts for an Auto

Painting parts on an auto requires different products. They also require a different preparation. Applying spray paint to these parts is not a good idea because the paint will crack and peel quickly. This article will instruct you on how to paint parts for an auto.

How To Paint Parts For An Auto

1. Remove the parts from the auto if possible. Mask the area around the part if you are unable to remove it.




2. Wash the part with a car wash soap and rinse. Allow part to complete dry and then apply rubbing alcohol. Wipe the part with a wax and grease remove using a lint-free towel.




3. Sand the parts with an 800 grit sandpaper and water. Rinse the part and allow it to completely dry.




4. Apply an adhesion promoter to the plastic parts. Allow it to dry. Prime the part again and allow it to dry.




5. Paint the parts with three coats of paint and allow each coat to completely dry before applying the next coat.




6. Spray two coats of clear coat. Allow the clear coat to dry overnight.