How to Paint Plastic Motorcycle Parts
Removing the paint from the plastic parts on your motorcycle can prepare it for new paint, especially if you want to change the look or the parts are damaged. The process of painting plastic is much more different than painting the metal parts on the bike.
How to Paint Plastic Motorcycle Parts
Materials Needed
- Bucket
- Water
- Soap
- Sponge
- Microfiber cloth
- 120 grit sandpaper
- Primer with flex agent
- Guide coat
- Paint gun
- 320 grit sandpaper
- 600 grit sandpaper
- Wax remover
- Grease remover
- Paint
- Make sure the motorcycle is parked in a shaded location. You should not paint the parts in direct sunlight.
- Fill a bucket with soap and water. Use the cleaning solution and a sponge to clean the part. Use clean water to rinse the part. Dry the part with a microfiber cloth and allow it to completely dry.
- Use 120 grit sandpaper to sand over the plastic part. Apply circular motions as you sand the area. This will remove the top layer to prepare it for the rest of the process.
- Apply a coat of primer to the part. You want to make sure the primer has a flex agent in the ingredients. Make sure you do not skip this part because this primer will keep the part from cracking in the future. Allow the primer to dry for 30 minutes.
- Cover the plastic part with a layer of guide coat. You can apply it with a paint gun. Allow the guide coat to dry for one hour.
- Lightly sand the part with 320 grit sandpaper. Use light and circular motions as you go across the part.
- Change to 600 grit sandpaper and go over the plastic part. Apply wax remover on the part. Next apply the grease remover to the part.
- Put paint in the paint gun. Coat the part with the paint. Allow the first coat to dry for 15 minutes. Apply the second coat and allow the motorcycle part to dry for several hours.