How to Paint Wood Wall Paneling
Wood wall paneling used to require complete removal to change the look of the room. The process would take about two weeks to accomplish. Painting the wood wall panel is much easier and quicker than taking it down. You can change the look at any time using paint so you can spend your weekend doing other things.
How to Paint Wood Wall Paneling
Materials Needed
- Putty knife
- Putty or joint compound
- Medium grit sandpaper
- Fine grit sandpaper
- Sanding block
- Bucket
- Water
- All-purpose cleaner
- Sponge
- Alkyd primer
- Paint stirrer
- Acrylic latex paint
- Take a putty knife and apply wood putty to any areas in the wood wall paneling that has holes, cracks or gouges. Spread the putty so it is even with the rest of the paneling. Apply joint compound instead of putty if you have grooved wood wall paneling. Allow the putty to completely dry.
- Use medium grit sandpaper to sand over the putty or joint compound to make sure the area is smooth and even. Apply fine grit sandpaper over a sanding block and go over the putty or joint compound. This step will create an ideal surface for the primer and paint to adhere to.
- Fill a bucket with water and an all-purpose cleaner. Use a sponge to clean the entire wood wall paneling. Use clean water and a sponge to rinse the paneling. Allow the wall to completely dry.
- Open a can of alkyd primer and stir it with a paint stirrer. Apply the primer over the paneling with a paintbrush. Allow the primer to completely dry following the instructions on the package.
- Remove the lid from a can of acrylic latex paint and mix it with a paint stirrer. Use a paintbrush to apply a coat of paint. Allow the paint to dry and apply a second coat of paint. Allow the paint to completely dry.