How to Paint a Car
You can paint a car yourself. The entire process can take about five to six hours to complete. The process also requires a lot or precision. You can get a professional looking vehicle at home without spending thousands of dollars. This article will instruct you on how to paint a car.
How To Paint A Car
Find a well-ventilated place to work. Avoid garages because the water heaters or furnaces can ignite when around paint fumes.
Remove any dents or rust that will be visible when the process is complete.
Remove any chrome or plastic trim from the car.
Sand the paint to the bare metal or the original primer. The best results will require removing the paint down to the bare metal, repriming, and then applying the paint.
Clean the surfaces thoroughly with mineral spirits or a denatured alcohol.
Use masking tape to cover areas that is not going to be painted. Make sure there are no holes in the masking tape.
Prime the surface with a primer if the paint is down to the bare metal. Prime areas that have body fillers or areas that rust was removed from. Smooth the areas and apply enough paint to fill the scratches or pits.
Allow the primer to cure.
Sand the prime areas until they are smooth with 600 grit sandpaper. Clean the surface with a grease remover to remove any dust.
Prepare the paint according to the manufacturer's instructions. Spray the paint on the car and allow it to fully cure. Full curing can take as long as seven days depending on the product. Keep the car free of dust during this period.
Sand the car with a wet 1200 grit sand paper. Sand the car until it is smooth and rinse any residue from the car.
Allow the car to dry.Apply a clear coat for high gloss look. Sand the area with a 1500 grit wet sand paper.
Use a buffing machine to bring out the gloss. Buff the edges by hand with a rubbing compound.