How to Paint a Corrugated Metal Roof
Painting a metal a corrugated metal roof requires a little of bit of work because of the material of metal roofs. You have to prepare metal roofs to for paint adhesion with a special type of acidic primer. It is important to be careful of the paint application with corrugated roofs because they are prone to heavy drips and runs.
Materials Needed:
- Extension ladder
- Pressure washer
- Professional painter's tape
- Heavy-duty fabric drop cloths
- Galvanized metal etching primer
- Roller frame
- Nap roller cover
- Acrylic latex paint
- 3- to 4-inch latex paintbrush
- Use an extension ladder to get to the corrugated metal roof.
- Clean the metal roof with a pressure washer. Use a low-pressure tip to clean the metal roof. Allow 2 to 4 hours for the roof to completely dry.
- Use painter's tape to cover the portions of the roof corrugated metal roof that you do not want painted. Use heavy-duty fabric drop cloths to cover the areas beneath the roof to protect them.
- Cover the corrugated metal roof with a coat of galvanized metal etching primer. Use a roller with a nap cover and roll a 3-foot-by-3-foot area at a time. Use a paintbrush that can be used with water-based coatings to smooth out the wet primer. Continue this process to prime the entire roof and wait at least 2 hours for the primer to dry on the roof.
- Paint the corrugated metal roof using acrylic latex paint. Apply the paint in the same manor as the etching primer. Allow at least two hours for the painted metal roof to dry.