Previous Article

How to Paint a Cedar Fence

Next Article

How to Paint a Steel Fence

How to Paint a Rusty Metal Paint

If you have a rusted metal surface in your home or yard, you can improve its appearance by applying a fresh coat of paint. Painting rusted metal is a bit more complicated than painting an ordinary metal surface. You will have to invest some time into prepping the surface before you apply a coat of paint.

Things You Will Need:



  • Water

  • Mild soap

  • Rag or towel

  • Metal scraper

  • Wire brush

  • Sandpaper

  • Zinc chromate or iron oxide primer

  • Oil-based paint in your choice of color



  1. Clean the metal surface thoroughly. Use a metal scraper to remove any lose or flaking pieces of rust. Use a metal brush to scrub the surface and remove the smaller pieces of rust that might not be visible to the naked eye. Smooth any rough areas on the metal by rubbing the surface gently with a piece of sandpaper.

  2. Wash the metal surface. Mix some mild soap into a bucket of water and dip a rag into the mixture. Gently wash the metal surface in order to remove dirt, grime and any remaining rust particles that might be stuck to the surface.

  3. Prime the metal. It is important that you do not use a latex-based primer on rusted metal. Latex-based primers will allow the rust to bleed through to the surface. Instead, you must use a zinc chromate or iron oxide primer. Apply a thin, even coat of primer to the surface of the metal. Allow the primer to dry completely. If desired, apply a second coat of primer.

  4. Paint the metal. Use an oil-based paint. Apply several even coats of paint to the metal surface, allowing adequate time for the paint to dry between coats.