Previous Article

How to Paint and Stain Black Furniture

Next Article

How to Paint and Stain Laminate Cabinets

How to Paint and Stain Brick Fireplaces

Updating your brick fireplace can be as simple as adding a few coats of either paint or stain to its surface. Once you paint or stain your fireplace, keep in mind that you will need to maintain each of these finishes afterward. Paint that is chipping or peeling will need to be reapplied, particularly if the fireplace was not properly prepared before the initial painting.

Items Needed:



  • Wire-bristled brush

  • Hot, soapy water

  • Painter's tape

  • Drop cloth

  • Primer (optional)

  • Painting supplies

  • Paint or stain



  1. Clean the brick fireplace with a wire-bristled brush and a mixture of hot, soapy water. If your fireplace has not been cleaned in a long time, you may need to clean it several times with this mixture. Rinse the fireplace thoroughly and allow it to dry.

  2. Use painter's tape to mark off any areas you do not want to paint. Also mark off the wall nearest the fireplace so you do not inadvertently paint the wall.

  3. Drape a drop cloth on the floor surrounding the fireplace. Make sure the drop cloth covers all of the flooring.

  4. Use a brush to apply primer to the fireplace. Use a primer that is designed for the type of paint you have decided to use. Make sure to coat the brick thoroughly, including the mortar. If you are planning to use stain instead of paint, do not worry about using primer.

  5. Let the primer dry according to the package directions.

  6. Apply paint or stain directly to the bricks. Because of the uneven surface, you need to make sure you keep your brush full of paint or stain and spread it over the entire surface.

  7. Allow the paint or stain to dry thoroughly before applying a second coat.