Previous Article

How to Cut Patio Bricks

Next Article

How to Set Patio Bricks

How to Paint on Patio Bricks

Brick is one of the most versatile design mediums. With a little paint, planning and effort, it is possible to update or transform the brick surface of your common patio into something more reflective of your personal style. There are a few things you need to know before starting.


  1. Clean your surface. Ensuring that the surface of your brick patio is clean is essential to getting optimal results. A pressure washer set to 1,500 to 2,000 PSI can accomplish this. Use a mild detergent, and completely saturate the brick during cleaning. Use a stiff scrub brush to take care of any stains.

  2. Rinse your surface. Bricks are porous, so it is vital that you rinse the surface well, making sure to leave no trace of the detergent behind. The detergent residue can make it difficult for your primer to adhere to the brick, which can cause blistering later. Allow at least 24 hours in clear weather for drying before continuing.

  3. Apply conditioner. If the bricks you wish to paint over seem slightly soft or powdery to the touch, apply Masonry conditioner. This helps consolidate the brick. Apply it with a normal paint roller for easy application. Permit at least 24 hours for the brick to dry.

  4. Apply primer. By their very nature, bricks require a special primer to ensure a successful paint job. Typically, it is best to use an acrylic universal primer or a masonry primer that dries swiftly. Most primers dry within one to two hours. Dilute any overly thick primers with a bit of water for deep penetration into the brick surface. Keep primer spread evenly over the entire surface.

  5. Paint the bricks. Because of their ability to absorb moisture, choose 100 percent acrylic house paint. For your first coat, back brush the paint over the surface to ensure a nice, even coat. Permit the first coat of paint to dry completely before adding your second coat. A nap roller roughly three-fourths of an inch thick is appropriate to use for the distribution of your second coat. Allow to dry completely.

  6. Repeat as needed. Continue adding single layers of paint via your nap roller, and allow full drying time between coats.