Previous Article

How to Make Rough Lumber Into Finished Lumber

Next Article

How to Prepare Rough Lumber

How to Plane Rough Lumber

Learning to plane rough-sawn lumber will expand your woodworking skills and give you access to a wide range of projects.  Bench planers are powered versions of handheld planers that sit on a work surface and finish in a fraction of the time the process of whittling down the rough edges and uneven parts of lumber.  If you only have a hand planer, the following instructions still apply.

Things You'll Need:



  • Lumber

  • Pencil

  • Bench Planer

  • Safety Goggles



  1. Draw a symbol to mark the finished depth you want the planed lumber to be.  Make sure and mark all rough sides that need to be planed.   

  2. Position the planer depth to 1/32 inch shorter than the depth of the side of the wood you want to plane.  Set the planer to 3-31/32 inches if the wood is 4 inches thick on the side that needs to be planed.  Do not use a planer on wet lumber, as the surface will not smooth out correctly.

  3. Put on the safety goggles and set the wood down at the opening of the bench planer. Position the wood so that the planer blade will move along the direction of the wood grain.  The wood grain is the pattern of the fiber lines in a piece of wood.

  4. Turn on the planer and apply light pressure to the wood to lead it through the bench planer. Do not force the wood through the plane, or it will cause marks in the surface of the wood.

  5. Turn off the planer once the wood passes all the way through it.  Inspect the wood to see if it requires further planning.  If further planning is needed, lower the blade by another 1/32 of an inch and pass the wood through again.  

  6. Turn the wood between passes if more than one side needs to be planed.  Plane each side no more than 1/32 at a time until the wood is smooth.