How to Preserve Cedar Boards Inside
Cedar boards add an element of rugged sophistication to rooms. However, they must be protected from moisture. If they are not protected, then moisture will seep into the boards and damage them. Additionally, it is important to protect these boards from stains. After all, you do not want your cedar boards to have eye catching stains.
Items Needed:
- Sealant
- Goggles
- Gloves
- Drop cloth
- Brush
- Use the drop cloth to cover the flooring around the cedar boards. If the sealant spills on the flooring, then it can leave a stain that is difficult to remove. Place heavy items along the corners of the drop cloth. These will hold the cloth down and keep it from moving while you are working.
- Place the goggles over your eyes and the gloves on your hands. If the sealant comes into contact with your skin or eyes, it can cause severe irritation. Always wear protective equipment when you are working with sealant.
- Apply the sealant to the cedar boards. Use a brush to apply an even layer of sealant on all the cedar boards. This will prevent moisture from seeping into the wood and damaging it. Sealant will take approximately one day to completely dry.
- Apply the second layer of sealant. You may need to apply additional coats. However, before applying any sealant, make sure that the previous coat is completely dry. If it is not dry, then you will risk causing it to appear uneven.
- Allow the coats to dry before moving furniture or other items close to the cedar boards. Sealant will stain most items. Therefore, you should allow the cedar boards plenty of time to dry before moving items back into their vicinity.