Previous Article

How to Make Fiber Cement Siding

Next Article

How to Use Fiber Cement Siding

How to Prime Cement Siding

If you have cement siding that you will be painting, make sure that you give the area a good coat of primer before you paint it.  Repair all damaged areas in the cement and clean siding thoroughly to make sure that it is in the best possible condition to prime.

Things You'll Need:



  • Cement patch material

  • Soap and water

  • Hose

  • Pressure washer

  • Acrylic primer

  • Paint tray

  • Roller

  • Paint brush



  1. Inspect your cement siding and look for any cracks or chips in the material.  Repair any damaged areas using cement patch material and allow it to dry completely.  Make sure that all areas are repaired so that the siding is in the best condition for painting.

  2. Wash the siding thoroughly to remove and dirt or debris that has accumulate on the area.  If siding is not very dirty, use soap and water to do this making sure to spray off any soap with a hose when you have finished.  If the siding seems very dirty or if it has never been washed, use a power washer. Use a lower setting on the washer to make sure that you do not damage the area.  Allow the cement to dry for at least two days.

  3. Prepare your primer by mixing it thoroughly and pouring into a paint tray.  Make sure that the paint you are using is acrylic paint so that it adheres to the siding properly.  Use a roller to apply paint to the siding and use a small paintbrush to get into any crevices.  Start painting at the top left of the siding working your way across and then down until the entire area is complete.

  4. Allow the paint to dry completely and inspect the siding to determine if you should add a second coat of paint.