How to Program a Lincoln Town Car Remote
The wireless remote for the Lincoln Town Car allows you to lock or unlock your doors from a distance. If you need to program a new remote for your Lincoln Town Car, you can do this very simply and it only takes a few minutes. You can program as many remotes as you need.
- Shut all of the doors on your Lincoln Town Car. Open the driver’s door, and press the unlock button on the door panel.
- Sit down in the driver’s seat and insert the key in the ignition to the “ON” position. In the On position, your car is on but it is not actually running. Repeat this step seven more times quickly. You need to do this a total of eight times within 10 seconds, except on the eighth turn; you will actually start your car. You will hear the doors in your car lock and then unlock if you did this correctly. Redo this step if your card does not lock and unlock automatically.
- Press any button on the remote within 20 seconds, and you will hear the doors on your car lock and unlock again. If you do not hear them lock and unlock, you will have to start over with Step 1.
- Press any button on the new remote within 20 seconds, and you will hear the doors on your car lock and unlock again.
- Turn the key in the ignition to the “OFF” position, which will turn your car off. The remote should now be reset. Test the remote to ensure it is working correctly.