Previous Article

How to Make Homemade Floor Wax

Next Article

How to Remove Floor Wax Buildup

How to Properly Apply Future Floor Wax

Future floor wax has been around for a long time keeping floors shiny and looking new. If you have looked for it, it is not because it is not made anymore. The name has changed and is now known as Pledge with Future Shine.

How to Properly Apply Future Floor Wax


Materials Needed



  • Broom

  • Bucket

  • Cold water

  • Ammonia

  • Sponge mop

  • Future wax



  1. Use a broom to thoroughly clean the entire floor. You want to make sure the floor does not have any dirt and debris. A clean floor will help the wax adhere better.

  2. Fill a bucket with 1 gallon of cold water. Add ½ cup of ammonia to the bucket. Swish the liquids around with a sponge mop to make sure they are completely blended.

  3. Squeeze the sponge mop out until it is damp. Scrub the floor in sections but dip the mop in the cleaning solution as often as possible to clean the floors.

  4. Pour the ammonia and water mixture out and rinse the bucket. Rinse the sponge mop also. Fill the bucket with clean cold water. Use the clean water to rinse the entire floor. Allow the floor to completely dry for two hours.

  5. Squeeze a little of the Future wax in a line on the floor. Make sure you only use a small amount and work in a small section at one time. Use a clean mop to spread the wax across the floor. Continue applying and spreading the wax until the floor is complete. Allow the floor to dry for six hours and apply another coat of wax. Allow the floor to completely dry.