Previous Article

How to Put Car Door Glass on Track

Next Article

How to Put Chocolate Curls on a Cake

How to Put Chains on Tires

Snow on the roads can make driving very difficult. The snow on the road lowers the tires traction, which can cause the cause the car to lose control and cause and accident. Chains applied to the tire can provide more traction to the tires. This will only happen if the chains are installed correctly on the tires.

How to Put Chains on Tires


1. Spread the chains on the ground. The sharp edges of the cross chain hooks should face upwards.


2. Roll the vehicle over the chains about 2 feet or until the leading part of the chain has passed underneath the tires.


3. Pull the chains up over the tread of the tires.


4. Locate the hooks on the inside wall of the tires. This is where you will hook the chain to the tire. Do this to each tire. You will hook the opposite end of the chain.


5. Pull on the chains to remove any slack in the chains.


6. Locate the S cam style hooks on the outside wall of each tire. This is where you will hook the opposite end of the chain.


7. The S cam is a metal plate that is shaped like a half moon. It also has a slot in it.


8. Tighten the S cams with the T shaped cam that came with the chains. The T shaped cam will fit into the slots.


9. Twist the tool to lock the cams in place.


10. Look for a rubber cord or a chain style tensioner. Fasten those across the front of the tire.


11. Drive the vehicle a quarter of a mile on the chains.