How to Put Up Office Cubicles

Office employees set up cubicles to separate the workspace of each person. The simplest method of putting up office cubicles is to purchase a kit. These kits come with everything you need including the risers, panels, brackets and screws. It is not hard to learn how to put up office cubicles, and the entire installation process takes about 30 minutes.

Supplies

• Cubicle kit


• Measuring tape or yardstick


• Electric screwdriver with a Philips head

Installation

1. Check the bottom post risers and push them all the way down to the bottom of the posts.


2. Place a panel into the top of the upright posts and slide it down into the grooves. Push down on the panel until it is flush with the bottom risers. 


3. Place the aluminum bar at the top of the panel and slide it into the grooves on top of the panels.


4. Slide the change of height filers down into the posts to raise or lower the panels.


5. Place the end of the measuring tape or yardstick on the floor next to the upright post and measure 28 inches up. Place the support bracket into the track of the post and slide it down until it reaches the 28-inch mark on the measuring tape.


6. Position the screw into the support bracket and tighten with the screwdriver.


7. Install the remaining panels to make the desired cubicle shape.


8. Place a metal top cap into the upright posts, place a screw into the hole and tighten with the electric screwdriver.


9. Position the plastic caps over the screws and push them down into place.


10. Place the workbenches along the support brackets and screw them into place.


11. Install the power panel covers underneath the standard panels by placing them onto the bottom of the power panel and pushing them forward.