How to Read a Metal Fabrication Blueprint
If you are planning to fabricate metal by following a blueprint, you'll first need to have an understanding of all the components that are included within the document. The blueprint will require that you pay particular attention to the dimensions and tolerances of each part of the machine.
- Review the main components of the blueprint. The blueprint will include the dimensions of the side. You can use the dimensions to determine how big a piece of raw material you will need to complete the cutting process. Ensure that you leave at least 1/4 of an inch or more due to the difficulty to make all raw materials the same size.
- Inspect each of the tolerances noted on the blueprint for the individual dimensions. There are universal tolerances listed within the information box, however individual tolerances will have precedence over any of these tolerances. Make a note of each of the individual tolerances listed.
- Look at each of the screw thread markings. Even though the threads may not look correct, each one of these markings is an indication of the thread dimensions required for the part. Each of the numbers listed next to the thread designations are an indication of the size of the thread and the amount of threads needed per inch of the material.
- Notate the surface finish section listed on the blueprint. Within this section, you'll find different degrees of smoothness that are required for each part needed for each surface. Look at the check mark and corresponding number to gain this information.