How to Refinish an Antique Mirror
Refinishing an antique mirror isn’t the easiest task in the world, but it is one that can be done without the assistance of a professional. Having a professional refinish it for you can end up costing a fortune. If you’re willing to be patient and purchase a few basic materials you can do this at home for a fraction of the cost.
Getting an antique mirror refinished professionally can be a costly job. Doing it yourself can be a great way to save money and have a deeper appreciation for your antique.
What You’ll Need:
- Soft Cloths
- Stain
- Painter’s Tape
- Fine Grit Sandpaper
- Newspaper
- Polyurethane
- Small Paint Brush
- Take the mirror to a place where you won’t have to worry about the sanding dust. Cover the glass of the mirror using painter’s tape and newspaper. Do not cover any of your wood with the tape.
- Sand the frame of your antique mirror on all sides with fine grit sandpaper. Apply a small amount of pressure as you sand. Do this until the old finish is gone and there is only bare wood. Use a soft cloth to remove the dust.
- Find stain that is close in color to the original finish if you want it to look like it did. A soft dry cloth can be used to apply the stain to the mirror. Use a clean cloth to get rid of all the extra stain. If you want it to appear darker, then apply another coat immediately.
- Apply polyurethane with the help of a small paintbrush. Be sure not to stir or shake the polyurethane before you use it. This could create air bubbles that can do damage to the finish. Give the polyurethane an hour to dry before adding a second coat. This coat will also need an hour to dry.
- Remove the painter’s tape and newspaper after the second coat has dried.