Previous Article

How to Remove Condensation From Double Pane Windows

Next Article

How to Seal Double Pane Windows

How to Remove Double Pane Windows From a House

The most innovative and chore saving thing to come along in home windows is the double pane window. They are not only known to be great energy savers but they truly make window cleaning much easier than it has ever been. You can easily remove the entire window for maintenance or drop in for cleaning.


  1. Unlock the window locks found on the bottom of the upper window sash while inside the home or office. Open the bottom window about half way.

  2. Feel both sides of the bottom window sash and you will find a tab on each side. Slide these tabs towards the center of the sash and while gripping the sash pull towards you firmly. The window will drop inside for easy cleaning or maintenance. If you wish to take it completely out for maintenance tilt the entire sash right or left. That will take the pins holding it in place out of the track and the window can be removed at this time.

  3. The top sash is removed by the same method including complete removal for maintenance. Always remove the bottom window first.

  4. When ready to re-install the windows reverse the procedure replacing the top sash first. Just tilt the window right or left and place the two pins back in their tracks. Once the top sash is in place replace the bottom sash.

  5. It is good advice to have a table about windowsill high to rest the windows on while removing or even just when cleaning. This will prevent dropping them and perhaps breaking the glass or damaging the frames.