How to Remove Linoleum Tiles
If you are updating your kitchen and have linoleum installed, it will be difficult to remove it. It is even more difficult depending on the type of foundation it was installed on. These are things that you must understand before taking on the task of removing linoleum.
How to Remove Linoleum Tiles
Materials Needed
- Utility knife
- Hot water
- Bucket
- Cloth
- Heat gun
- Determine if the floor underneath the linoleum is concrete, hardwood or plywood. If concrete is underneath, you will have an easier time removing the linoleum. If plywood or hardwood is underneath, it will be more difficult to remove because of the adhesive.
- Start removing only a small section of the linoleum at a time. This will make it much easier to tackle the job and serve as your guide to the type of floor you have underneath. Take a utility knife and begin cutting around the small section of linoleum.
- Fill a bucket with hot water. You will have to frequently change the water if it becomes cold because the removal is much better when done with hot water. Take a cloth and dip it into the hot water. Apply the cloth to the lines that you cut with the utility knife. Skip this step if you have determined that the floor underneath is hardwood.
- Begin to peel the linoleum with the help of a heat gun. Heat the linoleum and peel slowly. Heat another part of the linoleum and peel it back. Place a scraper under the linoleum if you need more help removing it. Continue this over the entire floor.