How to Remove Old Picture Windows

Windows used in older homes were built different than windows today. Technology today makes windows much easier to install. When removing old windows you need to make sure not to damage the framing around the window. If done properly the new window will be very easy to install.

Supplies needed

• Hammer


• Nail set


• Flat bar


• Utility knife


• Putty knife


• New windows


• Measuring rape


• Safety glasses


• Safety gloves

1. 
   
   Measure your old windows. Add three points along the window. Take the measurements to the window supplier store. Order your new windows. Do not remove your old windows until you receive your new windows from the supplier.
   
   


2. Find the trim on the window that meets the window sash. Using a flat bar pull the trim from the window and away from the glass. This trim is what holds the window glass in place.


3. Remove any paint, caulk or glazing that is around the window trim by using a utility knife. Pry the trim from the window by using a pry bar and a hammer. Save all the trim and replace It with the new windows. 


4. Unscrew any screws used to hold the frame in place. Remove any remaining trim with a flat bar.


5. Pull your window out of the wall. Be very careful when doing this step not to damage the framing. Put all nails in the framing around the window opening. You are now ready for your new window.

Tips & Tricks

1. To protect the sheetrock use a scrap piece of wood when removing the window.


2. Always use safety goggles when working with glass.