How to Remove Rust From Fishing Lures

Rust on a fishing lure hook can cause tetanus if a person punctures himself. Rust can also ruin a person’s fishing lures. There are ways to prevent and remove rust from fishing lures, and the process is not too difficult. Just be cautious when dealing with rusty items.

Items needed:

• Scrub brush


• WD-40


• Scouring soap pads


• Water


• Rubber gloves


• Bucket of hot water


• Towels

1. Cover your hands with a pair of rubber gloves to protect them. Rubber cleaning gloves can be purchased in the cleaning isle at many department or grocery stores.


2. Fill a bucket with hot water, and soak a scouring soap pad in it. Scrub away at the rusty lure with the pad until all of the rust has been removed.


3. Place the cleaned lure into the bucket of hot water to rinse it.


4. Dry all of the lures you clean up with a dry towel. Make sure not to leave any excess water on the lure to prevent rust from occurring again.


5. Purchase a can of WD-40 from the local hardware store to treat each lure. Simply spray the lures down with the lubricant carefully.


6. Use another towel to dry off any extra WD-40 to complete the job. Leaving too much lubricant on the lure can cause a mess in the tackle box. After the lubricant is applied, the lures should be cleaned and protected from rust.


7. The lures will need to be treated with WD-40 after every few uses to prevent them from rusting again.