How to Remove Tints From Prescription Sunglasses

Prescription sunglasses have a tint that is supposed to be a permanent part of the sunglasses. Sometimes people do not want to have the tint and just wear the glasses without it. The tint does not have to be removed by your eye doctor. It can be removed at home with the use of a lens-dyeing unit.

Materials Needed
- Eyeglass screwdriver
- Clean cloths
- Distilled water
- Lens-dyeing unit
- Lens neutralizer or bleach
- Use a small eyeglass screwdriver to remove the screws from the frame around the sunglasses. Some sunglasses will allow you to pop the lens out. Remove the sunglass lens carefully from the frame.
- Pour distilled water on a clean cloth and use it to clean both sides of the sunglass lens. Dry the lens with a dry cloth. Spread the cloth out and place the lens on top of the cloth to dry while the lens dyeing unit heats up.
- Plug in the unit and fill the tank with lens neutralizer or bleach. Allow the unit to heat up to 210 degrees Fahrenheit. You should not allow the unit to go over the temperature. Read the instruction manual for further assistance.

- Put both lenses in the tank on the unit. There should be a tank for each lens. Make sure the lenses are secured. Slowly guide them down into the solution.
- Allow the lenses to soak for one full minute. Check the lenses to see if they are bleached. If they are not, lower them back into the solution. Continue this step until they lenses are fully bleached.
- Remove the lenses from the unit. Rinse both lenses with distilled water and dry them with a clean cloth. Place the lenses back into the frame and secure them with the screws.