How to Remove Wood Window Shutters
Window wood shutters add design and decorations to your regular window. Removing window wood shutters is not that hard of a job. Whether you want remove the window shutters to paint them or to replace them it can me done in a just a few minutes.
Things you'll need:
- Socket wrench
- Phillip's screwdriver
- Pencil
- Number each shutter panel and each hinge pin with its corresponding shutter using a pencil. Opening and closing the shutter is what makes the shutter hinge rotate on the hinge pin.
- Turn the shutter dog clockwise. The shutter dog is the nice decorative piece of the shutter that fastens to the wall. It used to help keep the shutter open. Keep turning the shutter dog clockwise until the bottom wood the wood shutter is clear of the shutter dog.
- Take the outside edge of the shutter and grab it with your hand. Close the shutter to position it for pointing away from the wall. Carefully lift the shutter up and off the hinge pins that are attached to the frame of the window. Now you can remove the shutter from the house.
- Use a Phillips screwdriver to remove the screws that secures the hinge pings to the frame of the window. Make sure to remove both the lower and upper hinge pins. Place the pins in a safe place with their corresponding wood shutter.
- Remove the shutter dog. Using a socket wrench turn the bolt head of the shutter dog counter-clockwise to enable you to remove it from the wall.