Previous Article

How to Insulate a Basement Window

Next Article

How to Seal Basement Window Wells to a Cement Block

How to Remove a Basement Window

Basement windows will be a little more awkward to remove than regular house windows since they're low to the ground. You shouldn't need any extra tools than if you were removing a regular window. Removing basement windows to install new ones should make your house a little more energy efficient if you have a finished basement.

Things You'll Need:



  • Screwdriver

  • Container

  • Pry Bar

  • Reciprocating Saw

  • Goggles

  • Gloves

  • Cutting Oil

  • Dumpster

  • Tarp



  1. Remove any screws or brackets holding the windows in place. This isn't common on basement windows but it's certainly possible. Make sure you use the right type of screwdriver and put the screws and brackets in a container to throw away later.

  2. Remove the window sash and perimeter pieces with a pry bar. Be careful when using a pry bar. You could easily damage the window if you're not careful. Remember to pry towards your body for maximum force. Start removing the window sash and perimeter pieces in a corner and work your way around the window until you finish in the same corner. 

  3. Remove the frame of the window with a reciprocating saw. Make sure you wear goggles and gloves so you don't cut your hands or get anything in your eyes. Basement windows might be different than regular windows because they will probably have cement around them. This could make it difficult to cut them out so be patient. You might have to use a little cutting oil to keep the blades lubricated. 

  4. Throw the windows away in a dumpster or large trash can. 

  5. Tape a tarp over the opening created by removing the windows until you install the new ones. This will help prevent rain, dirt and small animals from entering your basement.