How to Repair Gaps in Timber Flooring
Most repairs to the old-style timber flooring don’t last very long. That’s because timber flooring expands and contracts with the changing seasons and weather. Filling the spaces with wood putty only lasts until the next time the floor moves because wood putty is inflexible. Stained hemp rope that matches the flooring is a longer-lasting option that can move with the wood.
You need
- Vacuum cleaner
- 1-1/2 inch hemp rope
- Utility knife
- Wood stain the same color as the floor
- Bucket
- Newspapers
- Putty knife
- Use the vacuum cleaner to remove all dirt and debris from the spaces in the timber flooring.
- Measure the length of the spaces that need to be filled. Cut the hemp rope into sections that are the same length as your measurements.
- Unwind the rope and separate a section that is about 50 percent thicker than the space it is meant to fill. Since one space may be wider than another, each piece of rope will have to be separated for each section.
- Put a few inches of wood stain in the bottom of the bucket. Drop each piece of rope into the stain, submerging it completely. After the rope has absorbed as much stain as possible, lay the pieces out on the newspapers. Allow to dry for 24 hours.
- Set a single section of rope into place. Using a putty knife and your hands, wedge the rope down for a tight fit. It is important to push the rope down until it is level with the surface of the floor.
- Repeat the process for the remaining spaces.