How to Repair Michelin Tires
Michelin is one of the top manufacturers of performance tires. These tires are good for high speeds but can be damaged just like other tires. The procedure to repair the tire is the same as with any other tire. A plug and patch must be applied to the tire.
How to Repair Michelin Tires
Materials Needed
- Pliers
- Handheld drill
- ¼ inch drill bit
- Prebuffer solution
- Rag
- Wire cutters
- Liquid tire cement
- Tire patch
- Stitcher
- Look over the tire to locate the item that caused the damage. Nails, screws, or glass cause most damage. If the damage is on the side of the tire, it cannot be repaired but it will need to be replaced.
- Use pliers to remove the glass, nail or screws from the tire. Use a handheld drill that has a ¼ inch drill bit to smooth burrs around the edge of the hole.
- Apply to a prebuffer solution a rag and clean around the hold to remove any debris left from the drill.
- Place a plug into the hole with a pair of pliers. Pull the pliers out quickly, which will leave the plug in the hole.
- Use wire cutters to snip away the excess parts of the plug. You want to make sure the rest of the plug is flush with the tire.
- Open a tube of tire liquid cement and apply it around the plug. Use only a thin layer of the cement. Smooth the cement out and allow it to dry for about five minutes.
- Apply a patch over the plug and press down on it. Make sure the patch is positioned directly over the plug.
- Use a stitcher to press the tire patch. Press the patch down with your hand for about three minutes. Allow the cement to dry for about an hour. Fill the tire with the recommended amount of air and replace the tire on the vehicle.