Previous Article

How to Reopen a Discharged Chapter 7 Bankruptcy

Next Article

How to Repair a Bathroom Sink Drain

How to Repair a Bath Tub Diverter

The bathtub diverter is the mechanism on top of the spout that allows the water to flow through the showerhead or the spout. Sometime the diverters need replacing because their components can wear out. The task of repairing a bathtub diverter can be accomplished by almost anyone with the help of a few household tools.


  1.  Find the screw underneath the diverter. You may need an Allen wrench to remove it or you may be able to screw the diverter off by grasping it and turning it to the left. Loosen the screw with several turns but do not remove it.

  2. Hold the bathtub spout and remove it with a slight pull towards you. You may have to turn it to the left to remove it.

  3. Remove the rubber washer from the spout. Replace the old rubber washer with a new one. This will prevent leaks and allow the diverter to move up and down freely.

  4. Lubricate the diverter mechanism with oil. This will ensure that the spout and diverter functions properly.

  5. Replace the spout by turning it to the right. Replace the diverter with all screws. Test the diverter by pulling it up until it locks into place. Then push it down to ensure it moves freely.