How to Repair a Metal Roof
One of the most annoying experiences is the sound of rain on a metal roof. What’s even worse is when a metal roof leaks. The good news is that you don’t need a professional to fix the problem. You can patch the hole yourself with the right directions and materials.
Things you will need to repair a metal roof:
- Pliers
- Sandpapers
- Solder
- Soldering Guns/irons
- Tin Snips
- Roofing Cement
- All-purpose Cleaners
- Wire Brushes
- Figure out the kind of metal the roof is made of and get a piece of the same to create the patch.
- Go to the damaged area and clean with all-purpose cleaner. Let it dry and use a wire brush to get rid of any debris.
- Create a patch that is at least two inches bigger than the damaged area.
- Take some tin snips and cut the corners away from the patch.
- Take the edges and fold them under a ½ inch. Next sand the folded parts until they become shinier than the patch.
- Apply flux on the surface that needs patching and on the folded edges of the patch.
- Take the patch and put it into place. Use a brick or cinder block to weight it.
- Take the solder and hold to the seam. Next use a soldering iron to warm until it runs and melts beneath the patch.
- Make sure you follow the patch all around with the solder and soldering iron. Be sure you don’t leave any open spaces or the patch won’t work.
- Create a pair of patches bigger than the hole.
- Take some roofing cement and coat the area.
- Put a patch over the area and put on some more cement.
- Apply another patch with some more roofing cement.