Previous Article

How to Repair a Pull on a Rug

Next Article

How to Repair a Rear Main Seal on a Truck

How to Repair a Pulley on House Windows

A faulty pulley could be causing problems when closing and opening a window. When the pulley is defective it needs to be repaired by repairing the series of pulleys and cords within the window. This article will instruct you on how to repair a pulley on house windows.

How to Repair a Pulley on House Windows




  1. Use a pry bar to remove the window stops and nails.


  2. Use a utility knife to lift the painted edges of the window. This will allow you to raise the window sash a few inches. Tilt the window sash so that it is free from the tracks and remove it.


  3. Remove the panel by removing the screws first. Remove the weights holding the panel in place. Cut the sash cord and remove it.


  4. There should be two screws holding the pulley assembly in place. Remove the screws and remove the pulley assembly.


  5. Install a new pulley and assembly and secure it with the two screws.


  6. Replace the old sash cord with a sash cord and thread it into the pulley.


  7. Re-install the panel that was removed in Step 3. Re-install everything that was removed in Step 2 and in Step 1.