How to Replace Belts on a KIA Sportage
The Sportage is Kia's four wheel drive vehicle. Like all vehicles, it is important that the Kia Sportage undergoes regular routine maintenance to ensure it stays on the road longer. One of the important maintenance routines is regularly changing the belts on your Kia Sportage.
Directions:
- Position the vehicle on an area level, with no incline. Apply the emergency brake and turn off the engine.
- Open the vehicle's hood to gain access to the engine. The serpentine belt is located at the closest part of the engine, right out in front.
- Locate the tensioner pulley for the serpentine belt. This tensioner pulley controls how much tension the serpentine belt has and must be adjusted to remove the belt.
- Release the tension from the serpentine belt's tensioner by using a socket wrench. There is a bolt on the tensioner that must be turned in a clockwise direction to release the tension.
- Remove the old serpentine belt from the pulleys and set it aside.
- Place the new belt on the pulleys, just as you removed the old serpentine belt.
- Adjust the tensioner in a clockwise direction to tighten the tensioner after you have positioned the new belt on the pulley for the tensioner.
- Close the vehicle's hood and crank up your car to make sure that the belt is functioning well. The serpentine belt should be moving along the pulleys without any problem. If there is a problem, you will need to make adjustments. Otherwise, you are done.
- Release your parking brake.