Previous Article

How to Load a Safety Razor

Next Article

How to Select a Safety Razor

How to Replace Blades in a Safety Razor

Safety razors are built for convenience. Just as the name suggests, safety razors give a close shave without the hassle of nicks and cuts. They also are extremely easy to maintain. When blades in a safety razor grow dull, replacement can be a snap.


  1. Before you replace the blades in your safety razor, it is important to know what kind of razor you have. You must buy the correct blades, because blades cannot be interchanged between brands and models. For instance, you cannot use Gillette Fusion ProGlide blades on a Schick Quattro razor.

  2. Once you purchase the proper replacement blades, you will notice that all of the blades are stored inside a plastic case that has no backing. Do not attempt to take out the blade cartridges by hand.

  3. Take the razor in one hand and the plastic case of blades in the other. You will notice on your razor that there are two buttons located at the top of the razor. Push these buttons together at the same time. A plastic piece at the top of the razor will retract.

  4. Press the razor into the back of one of the blade cartridges. Then, release the two buttons. The razor will lock into the cartridge. 

  5. Gently pull the razor away from the plastic case, pivoting the razor upward. Your new blade is now ready for use. 

  6. Store the plastic case with the remaining blades in a cool, dark area. To give a smoother shave, most safety blades also have a strip of soap at the top of the cartridge. This needs to remain dry for effective use.