How to Replace a Belt Buckle
Even the best belt buckles won’t last forever. Knowing how to replace them will help you save your good belts and save money in the long run. You can also replace a belt buckle if you want to update the style of old belts.
The type of belt you have will have a lot to do with how you replace a belt buckle. Not all belts that have belt buckles allow you to replace them. However, if you have a belt that you know lets you switch out belt buckles, then here is how you can replace one.
- Set the belt face down on a flat surface. The underside of your belt buckle will need to face upwards in order to remove your buckle.
- Look for snaps that are on the belt. They will be just outside of the belt buckle. Once you have located them you should pull back on the tab of the belt. It will be what is snapped just outside of the actual buckle. You should not have to pull very hard but you should be firm as you do it.
- Unfold the part of the belt’s flap where the snaps can unsnap themselves. The belt should lie flat as you take off the old buckle.
- Prepare your new belt buckle by laying it face down directly in front of you. The metal loop of the buckle should be facing your belt. The end of your belt needs to go directly through the metal loop of the buckle. When you get to the point on the belt where the old buckle was, stop.
- Allow the belt to go back into the fold it was originally in. You can then snap it back into place around your brand new belt buckle.