How to Replace a Heating and Cooling Thermostat
Thermostats control the heat or cool air that is created by a heating and cooling system. They are normally located on the unit itself or on a wall near it. When a thermostat breaks or is not functioning properly, it will need to be replaced.
Items Needed:
- Screwdriver
- Turn off all power to the air conditioner or central air unit. Unplug it and allow it to rest for at least 15 minutes to make sure electricity is not circulating through it. You should also turn off the power with the breaker that operates the unit.
- Remove the thermostat cover. This allows you to access the bolts that hold it in place. Remove the bolts.
- Inspect the wires inside the thermostat. You will need to label them to reconnect them properly once the new thermostat has been installed. Wrap a small piece of masking tape around each wire or set of wires, and use a pen to write down the labels. A red wire is typically the heating source for the transformer. Green wires control the fans and blowers. Yellow wires control the air conditioner settings.
- Take the wires out of the old thermostat gently. They can be pulled through the holes behind it.
- Bring the wire through the back of the new thermostat base. Identify each one and connect it to the proper terminals inside the new thermostat.
- Use the included screws and a screwdriver to attach the new thermostat to the air conditioner or central air and heating unit.
- Place the cover on the new thermostat, and fasten it in place.
- Turn the breaker back on, plug in the air and heating unit, and turn on the power.