How to Replace a Window Frame
Having a leaking or badly sealed window frame can be a hassle, especially during those rainy days. This can lead to a rotted window frame that would definitely have to be replaced. Watermarks around the wall of the frame are signs of a bad window frame. You will need to replace the frame as soon as you can to prevent it from any further damaged.
Things you'll need:
- Screwdriver
- Hammer
- Razor knife
- Tape measure
- Rubber maillot
- Saw
- Nail gun
- Nails
- Remove the trim from the window including both the interior and exterior trim. If the trim is caulked to the wall or window use a razor knife to score both sides of the trim. Use a pry bar or hammer to help pull it free. Too remove the exterior trim you may need to cut away the caulk by pulling off the metal flashing of the frame.
- Locate and remove the screws that secure the window to the buck frame. These screws can be found in the interior of the window frame. The screws may be covered by the window sashes and if this is the case, remove the window sashes first to access the screws.
- Remove the window to expose the buck frame by using rubber mallet to help free the window from the frame. A mallet especially works well if the window is very tightly in place. Depending on the window you may need to knock out shims that are between the exterior of both the window frame and buck frame in order to free the window.
- Replace any rotted wood that may be found on the buck frame. Use a hammer to get rid of any of the frames damaged pieces. Note the sizes of the wood of the frame before you remove the old rotted pieces of wood.
- Reinstall the new buck frame window and replace both the interior and exterior trim. Make sure you don't reuse exterior trim. The exterior trim is what helps protect the window from water and weather damage to the window frame.